+33 (0) 492 38 88 20Support/HelpDesk : +33 (0) 492 38 86 86
info@dsf-tech.com

(Bio)diesel & Oil preheater

(Bio)diesel & Oil preheater

(Bio)diesel & Oil preheater

The Topstart (Bio)diesel & Oil is an electrical preheating system with forced circulationmade to warm up the (bio)diesel or oil of the engine.

 

Universal systel

It is universal, reliable, easy-to-install and maintenance-free. The system has also following advantages: fuel savings, decreasing pollution, reduced engine wear, no more difficult cold starts.

An advantageous system

The system has also following advantages: fuel savings, decreasing pollution, reduced engine wear, no more difficult cold starts.

– Machined aluminium AIMgSi1 heating unit
– PA66 protection covers
– 1” Inlet and 3/4″ outlet

Safety thermostat with manual re-set option and 25A cutout rating, 6000 cycles (60°C/140°F or 110°C/230°F)

– Electric vane pump:750W
– Voltage: 230V
– Frequency: 50Hz or 60Hz
– Flow: 25L/min at 6 bar

– Incoloy 800 ® shielded immersion heater with very low specific power (2,5W/cm² – 0.39 W/sq in)
– Power: 1Kw
– Voltage: 230V

Those products are designed to be installed in heat engines for generator sets, locomotive engines, construction and emergency vehicles, lorries, buses and even marine engines.

DEMANDE DE DEVIS

To read the technical documents, please click on the link below:

Sale documentation

To contact customer support, please call +33 (0) 492 38 88 20 or send an email to support@dsf-tech.com.

To contact a sales representative, please send an email to info@dsf-tech.com.

For more information on the training documents, please call 04 92 38 86 86 or send an e-mail to laure.gillet@dsf-tech.com.

2017-06-30T11:19:25+00:00 27 April 2017|Preheater generator, Preheater vehicles, Preheaters marine|
417b5eeb99f2c50a08193e2d8c3a80f4//////////////////////////////