+33 (0) 492 38 88 20Support/HelpDesk : +33 (0) 492 38 86 86
info@dsf-tech.com

DYNA Actuators

DYNA Actuators

DYNA +1/+4, 2000-2005

The DYNA Plus l or Plus 4 actuator can be operated with any of the DYNA controllers to provide an engine governor for speed and power control of piston and gas turbine engines or steam and water turbines. The actuators can also be used in remote positioning and load control systems. The DYNA 2000 and DYNA 2500 linear actuators provide accurate, precise positioning with a minimal number of moving parts. Many of the moving parts normally associated with electric actuators are eliminated, prolonging the MTBF (mean time between failures).

DYNA 70025

The Barber-Colman Integral Governor System for Stanadyne “D” Series* injection pumps has been designed in close cooperation with Stanadyne. Through this cooperation a uniquely simple integrated governor is now available. The actuator design utilizes the principle of variable reluctance. This simple design of a proportional electric solenoid has a rotating armature whose magnetic force is proportional to input coil current. The integrated actuator and injection pump housing is very easy to install. Simply remove the existing cover and install the new cover.

DYNA 8000, 8200 & 8400

The Hazardous Duty DYNA 8000 and DYNA 8400 actuators provide units that are UL listed for Class I, Division 2, Group D, Hazardous Duty applications. The hazardous duty actuators can be used to provide an engine governor for speed and power control of piston and gas turbine engines. The hazardous duty actuator is a standard DYNA 8000 and DYNA 8400 actuator packaged to meet the UL, Hazardous Duty, Class I, Division 2, Group D requirements that are often encountered in the petroleum or chemical industries.

– Nominal voltage: 12VDC-24VDC
– Nominal current: 2,5A – 1,94A
– Temperature range: from -55°C to 124°C , from -65°F to +250°F

– Speed Governing, Remote Throttle Control
– Generator Sets, Pump Sets
– Power Carts and test stands
– All-electric, all-engine compatibility
– Mounts in any position, Engine-mounted (actuator only)
– High reliability due to few moving parts
– Proportional actuator, no hydraulic or oil line and nospecial maintenance
– Spring returns output shaft to minimum position on removal of power or loss of magnetic pickup signal
– Precise repeatability

– Nominal current: 12VDC-24VDC
– Vibrations: 5 – 500Hz
– Sealing: water, oil, dust
– Ambient working temperature: from -55°C to 125°C (from -65°F to +255°F)

– Nominal current: 12VDC-24VDC
– Vibrations: 5 – 500Hz
– Sealing: water, oil, dust
– Ambient working temperature: from -55°C to 125°C (from -65°F to +255°F)

The actuators can also be used in remote positioning and load control systems.

GET A QUOTATION
To read the technical documents, please click on the links below:

DYNA +1 +4 :

DYNA 8000 – 8200 – 8400 :

DYNA 2000 – 2005 :

To contact customer support, please call +33 (0) 492 38 88 20 or send an email to support@dsf-tech.com.
To contact a sales representative, please send an email to info@dsf-tech.com.
For more information on the training documents, please call 04 92 38 86 86 or send an e-mail to laure.gillet@dsf-tech.com.
2017-06-29T15:06:45+00:00 3 May 2017|Controllers generators, Generators, WOODWARD|
868324aba39e0da984445837db5975a7TTTTTTTTTTTT